Drinking Water Quality and Supply

Sorel-Tracy Drinking Water Quality

By OpenStats · Built from official Canadian sources

Regional estimate
See where Sorel-Tracy water comes from
A

Water quality grade

Excellent

Graded against Health Canada drinking water guidelines

Lead within guidelinepH in range
Hardness vs provincial average86 mg/L · prov. avg 183 mg/L
Lead vs provincial average0.6 μg/L · prov. avg 0.3 μg/L
Hardness
86 mg/L
Lead
0.6 μg/L
≤ 5 μg/L
pH
7.4
6.5–8.5 range
Hardness
86 mg/L
Moderate
Lead
0.6 μg/L
Max: 5 μg/L
pH
7.4
6.5–8.5
Chlorine
1.1 mg/L
Max: 4 mg/L

As an Amazon Associate, OpenStats earns from qualifying purchases.

Partner

Lab water test for Sorel-Tracy taps

Municipal reports cover the plant. A Tap Score kit tests the water at a Sorel-Tracy tap for a broader contaminant panel.

Lab kit partner link. We may earn a commission when tracking is active.

Partner

Waterdrop filtration systems

Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.

Waterdrop affiliate link. We may earn a commission.

Compare filters · Water test kits · Hardness guide

Reading this page

Sorel-Tracy's most recent drinking water sample (2026-07-22) reports hardness of 86 mg/L, classified as moderately hard, and pH 7.4, drawn from a surface water source and treated at Sorel-Tracy Water Treatment Plant. Lead measured 0.6 μg/L and fluoride 0.5 mg/L.

Free chlorine measured 1.1 mg/L in this sample. No E. coli was detected in this sample.

Sorel-Tracy's hardness of 86 mg/L is below the Quebec average of 183 mg/L across 34 tracked municipalities, with a provincial average pH of 7.5.

These readings summarize a single compliance snapshot, not a certification of the water reaching your tap. Test your own water periodically, especially on a private well, and consider a softener if hardness is classified hard or very hard.

How to use this page: read the headline metrics first, then where the water comes from (map and tap story), then the parameter table and source footer.

All monitored parameters meet Health Canada guidelines.

All health parameters meet Health Canada guidelines with comfortable pH, hardness, and turbidity.

Figure 1 · From source to sink

How drinking water reaches your tap

Compared to provincial average

Quebec · 34 cities in sample

Hardness (city vs Quebec avg)86 mg/L
pH (city vs Quebec avg)7.4
Lead (city vs Quebec avg)0.6 μg/L
Fluoride (city vs Quebec avg)0.5 mg/L

Provincial average: hardness 183 mg/L · pH 7.5 · lead 0.3 μg/L · fluoride 0.6 mg/L

Full parameters

ParameterReadingHealth Canada guidelineStatus
Hardness86 mg/LNo health limit (aesthetic)Compliant
pH7.46.5–8.5Compliant
Lead0.6 μg/L≤ 5 μg/LCompliant
Fluoride0.5 mg/L≤ 1.5 mg/LCompliant
Chlorine (free)1.1 mg/L≤ 4 mg/LCompliant
Turbidity0.7 NTU≤ 1 NTU (typical target)Compliant
Alberta water licences

WaterRegister.ca

On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.

Explore WaterRegister.ca →

Drinking water filters and test kits

Pitcher and under-sink filters, plus hardness strips and TDS meters for tap checks.

As an Amazon Associate, OpenStats earns from qualifying purchases.

· Compare options

Source · ECCC / municipal open data (seed). Last updated 2026-07-22. Refreshed on the site's automated schedule.