Drinking water filters and test kits
Pitcher and under-sink filters, plus hardness strips and TDS meters for tap checks.
By OpenStats · Built from official Canadian sources
Direct municipal dataWater quality grade
Fair
Graded against Health Canada drinking water guidelines
From source to sink
Lakes, rivers, wells, and treatment plants behind the kitchen tap, in plain language. Chemistry grades above are a separate lab snapshot; this section is the route the water travels.
Open the full tap storyOn the map
Source waters and treatment plants pinned from published utility names. Open a pin below for the full OpenStreetMap view.
Municipal service area
Approximate pin near Moncton (exact plant coordinates pending)
Map data © OpenStreetMap contributors. Pins are approximate for orientation, not legal survey points.
Surface water
Research confidence: high
Moncton Drinking Water Treatment Plant
City-owned Level 4 plant in the Turtle Creek watershed; operated under long-term contract by Veolia; coagulates/filters and chemically conditions water for corrosion control; cyanobacteria (ozone / PAC) upgrades underway.
Tri-community utility: City of Moncton supplies treated Turtle Creek watershed water to Moncton, Dieppe, and Riverview. Reservoirs sit about 10 km southwest of Moncton in Albert County; treated water is stored and pumped into the shared distribution system.
Pitcher and under-sink filters, plus hardness strips and TDS meters for tap checks.
Popular everyday tap filter
Recurring purchase
Higher capacity drinking water
High-ticket under-sink upgrade
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Moncton tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.
Waterdrop affiliate link. We may earn a commission.
Moncton's most recent drinking water sample (2026-07-22) reports hardness of 24 mg/L, classified as soft, and pH 8, drawn from a surface water source and treated at Moncton Water Treatment Plant. Lead measured 0.5 μg/L and fluoride 0.5 mg/L.
Free chlorine measured 1 mg/L in this sample. No E. coli was detected in this sample.
Moncton's hardness of 24 mg/L is below the New Brunswick average of 155 mg/L across 7 tracked municipalities, with a provincial average pH of 7.7.
These readings summarize a single compliance snapshot, not a certification of the water reaching your tap. Test your own water periodically, especially on a private well, and consider a softener if hardness is classified hard or very hard.
How to use this page: read the headline metrics first, then where the water comes from (map and tap story), then the parameter table and source footer.
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target.
One or more parameters exceed a Health Canada drinking water guideline or turbidity target.
Figure 1 · From source to sink
How drinking water reaches your tap
New Brunswick · 7 cities in sample
Provincial average: hardness 155 mg/L · pH 7.7 · lead 0.2 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 24 mg/L | No health limit (aesthetic) | Compliant |
| pH | 8 | 6.5–8.5 | Compliant |
| Lead | 0.5 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.5 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 1 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 3.8 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →Pitcher and under-sink filters, plus hardness strips and TDS meters for tap checks.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options